Double
Arm with Security Clamps
Strong double arm for use with standard
monitors. |
 |
Supports
Large Monitors |
|
Can
carry up to 85 lbs. Can also be converted to Flat Screen
Monitor Arm if required. |
|
Bring
Monitor Closer to Worksurface |
|
Unique
design allows infinite adjustment from 2¾" above worksurface
to 12¾" above worksurface. |
|
Includes
High Strength Clamp |
|
Two-piece
clamp (#6CC) is included. Grommet Clamp (#6GC) or Wall
Bracket (#6WB) may be substituted for an upcharge. |
|
Two
Platform Sizes |
|
Small
or large platform available. Specify desired platform
size upon ordering based on measurement of monitor base. |
|
|
 |
 |
Flat
Screen Monitor Arm
Strong double arm for use with flat
panel monitors. |
|
Use
with Flat Panel VESA Mount Monitors |
|
Includes
two standard VESA mounting brackets (75MM and 100MM). |
|
Bring
Monitor Closer to Worksurface |
|
Unique
design allows infinite adjustment from 2¾" above worksurface
to 12¾" above worksurface. |
|
Includes
High Strength Clamp |
|
Two-piece
clamp (#6CC) is included. Grommet Clamp (#6GC) or Wall
Bracket (#6WB) may be substituted for an upcharge. |
|
|
Monitor
Stackers
Stackable monitor support.
|
|
VuRite1 |
|
·11¼"
X 11¼" square
·1 1/8" thick
·Weight capacity: 150 lbs.
·Color: Putty
·Interlocks with VuRite1 & 2
·Qty per box: 6 |
|
VuRite2 |
|
·11¼"
X 11¼" square
·2 1/8" thick
·Weight capacity: 125 lbs.
·Color: Putty
·Interlocks with VuRite1 & 2
·Qty per box: 3 |
|
VuRite3 |
|
·17"
X 15"
·2" thick
·Weight capacity: 125 lbs.
·Color: Putty
·Interlocks with VuRite3
·Qty per box: 3 |
|
VuRite2
shown on bottom, 3 VuRite1's stacked above. |
|
|
 |
 |
Chrome
Wire Keyboard Tray
Keyboard holder attaches to MonitorMover™
platform allowing keyboard to be raised off the worksurface.
|
|
Create
More Workspace |
|
Use
in corporate or industrial applications to free up worksurface
when keyboard use is minimal. |
|
Use
with Model #655 |
|
Installs
directly onto MonitorMover™ platform. |
|
|
Monitor
Arm Attachment Brackets
Mounts MonitorMover™ arm to worksurface.
|
|
Two
Piece C-Clamp (#6CC) |
|
Mounts
arm to worksurface edge. If worksurface is part of a desk
or worktable, worksurface must extend beyond desk or table
apron by at least 1¼". This is the standard part
included when the MonitorMover™ arm is ordered. |
|
Grommet
Clamp (#6GC) |
|
Mounts
arm to top of worksurface through grommet holes. Fits
grommet holes 5/16" to 5" in diameter. |
|
Wall
Bracket (#6WB) |
|
Mounts
to wall behind workcenter. Allows arm to swivel 180°.
|
|
Note:
Mounting hardware and method of attachment are the sole
responsibility of the installer. |
|
|
 |
