PinnacleArm®
Adjustable arm attached to worksurface
and keyboard platform to allow ergonomic placement of keyboard
and mouse. |
 |
Highly
Adjustable and Versatile |
|
Combines
maximum knee clearance with a no-knob, no-lever, Lift-N-Lock™
height adjustment. |
|
Ball
Bearing Track |
|
Features
a sleek ThinGlide™ progressive ball bearing slide
track for smooth, consistent operation. |
|
Set
It Where You Want It |
|
With
a height range from flush to 6" below the worksurface,
and a tilt range of -15° to +10°, you'll easily find a
healthy, comfortable position for your PinnacleArm®. |
|
Other
Features |
|
·Independent
height & angle controls
·360° swivel for easy positioning and storage
·Available in three track lengths |
|
Note:
Platforms mounted on the #2170-17TG may not completely
retract under the worksurface in stored position. |
|
|
 |
 |
Fixed
Mount Arm
Adjustable arm without track for fixed
position applications. |
|
Highly
Adjustable and Versatile |
|
Combines
maximum knee clearance with a no-knob, no-lever, Lift-N-Lock™
height adjustment. |
|
Non-Retractable
Design |
|
For
applications where workcenter depth does not allow for
a track, or where sliding of the keyboard platform is
not necessary. |
|
Set
It Where You Want It |
|
With
a height range from flush to 6" below the worksurface,
and a tilt range of -15° to +10°, you'll easily find a
healthy, comfortable position for your PinnacleArm®. |
|
Other
Features |
|
·Independent
height & angle controls
·360° swivel for easy positioning and storage |
|
|
BudgetArm™
Adjustable arm attached to worksurface
and keyboard platform to allow ergonomic placement of keyboard
and mouse. |
|
Highly
Adjustable and Versatile |
|
Combines
maximum knee clearance with a no-knob, no-lever, Lift-N-Lock™
height adjustment. |
|
Nylon
Glide Track |
|
Uses
a smooth nylon track for depth adjustment. |
|
Set
It Where You Want It |
|
With
a height range from flush to 6" below the worksurface,
and a tilt range of -15° to +10°, you'll easily find a
healthy, comfortable position for your BudgetArm®. |
|
Other
Features |
|
·Independent
height & angle controls
·360° swivel for easy positioning and storage
·Available in two track lengths |
|
Note:
Platforms mounted on the #2175-17N may not completely
retract under the worksurface in stored position. |
|
|
 |
 |
ParamountArm®
Adjustable arm designed for fixed
height worksurfaces. Allows sit-to-stand operation of keyboard
and mouse platform. |
|
Extended
Reach Keyboard Arm |
|
Height
range of 6½" above the worksurface to 7½" below.
Meets most sit-to-stand requirements. |
|
Easy
To Use Tilt Control |
|
Tilt
ranges from -20° to +10°. The unique tilt control knob
is easy to reach and simple to use. |
|
Low
Profile Design |
|
Maximizes
knee clearance and starage, and protects the keyboard. |
|
Ball
Bearing Track |
|
Features
a sleek ThinGlide™ progressive ball bearing slide
track for smooth, consistent operation. |
|
Other
Features |
|
·Independent
height & angle controls
·360° swivel for easy positioning and storage
·Available in three track lengths |
|
|
Locking
Lever Adjustable Arm
Adjustable arm with ADA lever that
allows easy adjustment and locking of arm height. |
|
ADA
Lever Allows Easy Adjustment |
|
ADA
(Americans with Disabilities Act) lever allows simple
adjustment and locking of height position. |
|
Fingertip
Operation |
|
Pull
tab operates with just 3 lbs. of finger-tip effort. |
|
Sleek
ThinGlide™ Track |
|
Our
ThinGlide™ progressive ball bearing track provides
maximum knee clearance and smooth, consistent operation. |
|
Easy
Positioning |
|
360°
swivel allows for easy positioning and storage. |
|
Three
Track Lengths Available |
|
Choose
the correct model for you based on the depth of your worksurface. |
|
|
 |
 |
PowerLift™
II
Sit-to-stand adjustable arm converts
single-level worksurface to bi-level. |
|
Slim,
Low Profile Design |
|
BIFMA
tested for strength and human factors criteria. |
|
Infinite
Height Adjustment |
|
Easily
adjustable with one finger from 7.1" below the worksurface
to 8.8" above. |
|
Other
Features |
|
·150
lbs. load rating
·One lever tilt adjustment
·Easy keyslot mounting |
|
Available
in Five Widths |
|
Specific
keyboard platforms work with specific PowerLift™ II models.
Some platforms also require an adaptor. |
|
|
Adjustable
Corner Diagonal
Converts 90° and curved corners
(up to 9") to usable work areas. |
 |
Creates
Usable Work Area |
|
Allows
use of adjustable arm and keyboard platform where the
natural corner of the worksurface does not permit it. |
|
Adjustable
& Versatile |
|
Adjusts
to fit 1" - 2¼" thick worksurfaces. |
|
Easy
to Install |
|
Clamping
design eliminates spacers, saving installation time. |
|
Fits
a Variety of Combinations |
|
Specifically
designed to fit the Banana Board and Reversible 17" Corner
Combo-Platform. Will also work with other WorkRite combo
platforms. |
|
Available
in black. |
|
|
 |
 |
Compact
Corner Diagonal
Converts 90°, curved, and diagonal
corners (12" to 17") to usable work areas. |
|
Creates
Usable Work Area |
|
Converts
90° corners and diagonal corners less than 17" to usable
work areas. |
|
Get
Closer to Your Work |
|
Moves
operator 2" closer to worksurface than model #179CD. |
|
Designed
for #317RL |
|
Specifically
engineered to fit model #317RL Combo Platforms. |
|
Versatile
Application |
|
Available
in 1½" and 2½" sizes, and colors Black and Gray.
Other colors available upon quotation with minimum order
of 50. |
|
|
Corner
Rectangle
Converts 90° and corners with
keyboard cutouts to usable work areas. |
|
Creates
Usable Work Area |
|
Converts
90° corners and corners with keyboard cutouts to usable
work areas. |
|
Versatile
Application |
|
Available
only in 1½" sizes, and colors Black and Gray. Other
colors available upon quotation with minimum order of
50. |
|
|
 |
 |
PinnacleArm®
No Positive Tilt Kit
Restricts adjustable arms to negative
tilt in applications that require no positive tilt. |
|
Restricts
PinnacleArm® tilt to a range of -6° to -15°. |
|
For
use with PinnacleArm®, Fixed Mount Arm and BudgetArm®. |
|
|
Swivel
Plate
Allows keyboard and mouse platform
to pivot an extra 45° for special mounting requirements.
|
|
Easy
to Install |
|
Mounts
between the arm and keyboard platform. |
|
|
 |
 |
Mounting
Spacers
Used to attach adjustable arm tracks
when edge is thicker than worksurface. |
|
Required
only when the edge is thicker than the rest of the worksuface. |
|
Available
in 16" and 21" lengths (please specify). |
|
|
PowerLift™
II Slide Kit
Allows PowerLift™ II arm to store
easily under worksurface. |
|
Stores
PowerLift™ II Platform |
|
Slide
kit allows PowerLift™ II arm and platform to easily and
smoothly store under worksurface. |
|
Multiple
Models Available |
|
17"
version stores up to a 12" deep platform. 22" version
stores up to a 17" deep platform. |
|
Works
on Large Worksurfaces |
|
Minimum
worksurface depth of 23" (17" model) or 28" (22" model)
required. |
|
Easy
to Use. |
|
Features
sleek ThinGlide™ progressive ball bearing track. |
|
Fits
any width PowerLift™ II. |
|
|
 |
| |
|
