Peerless
|
Peerless Industries,
Inc. is
your source for LCD Projector Mounts, Plasma and LCD Screen Mounts,
Television Mounts, AV Stands, Carts and Pedestals, Camera and Speaker
Mounts
PEERLESS
ACCESSORIES
Back to Accessories
|
|
 |
 |
| Features: |
 |
Variable
(5) interface positions |
|
|
All
steel construction with tie-wire |
|
support
system |
|
|
Turnbuckles
to level the assembly |
|
|
White
fused epoxy finish |
| Other
Suspended Ceiling Kits: |
|
|
Suspended
Ceiling Kit |
| |
|
Unlike
our original single tray Suspended Ceiling Kit, these kits provide
one wide and one narrow ceiling plate resulting in variable
interface positions
- five attachment points from which to choose. The ceiling plate assembly
replaces one ceiling tile and is secured to the structure above
with four tie wires.
For heavy loads such as Jumbo Mounts choose model CMJ 453 (pictured
above). This kit includes tray reinforcements, heavy duty hardware,
tie wires and a center safety cable.
For LCD Projector Mounts and other lighter loads choose model CMJ
455. See below for actual load ratings. |
| |
| TECHNICAL
DATA: |
|
 |
| |
MODEL# |
| |
CMJ
453 |
|
CMJ
455 |
| WT. |
24.5
(11.1) |
|
14.8
(6.7) |
| SHIP.
WT. |
26.8
(11.5) |
|
16.8
(7.6) |
| MAX.
LOAD |
250
(113) |
|
50
(23) |
| |
NOTES:
ALL DIMENSIONS: INCH (MM)
ALL WEIGHTS: LB. (KG.)
MATERIAL: COLD ROLLED STEEL FINISH: WHITE FUSED EPOXY
COMBINED WEIGHT OF SUPPORTED ELECTRONIC EQUIPMENT AND HARDWARE
NOT TO EXCEED MAXIMUM LOAD. |
| ** |
FOR
CEILING TO CEILING DIMENSIONS GREATER THAN 36" ADDITIONAL
TIE WIRE MUST BE PROVIDED BY INSTALLER. |
| *** |
MODEL
CMJ 453 CONTAINS FOUR KNOCKOUTS, MODEL CMJ 455 CONTAINS
THREE. |
| **** |
MODEL
CMJ 453 ONLY. |
|
ARCHITECT
SPECIFICATIONS
The ceiling
fixture shall be a Peerless model CMJ___ Variable Position Suspended
Ceiling Kit, or equivalent, and shall be mounted where indicated
on the plans. It shall feature a two-piece ceiling plate offering
five different points of attachment for the Peerless mount to which
it will provide support. It shall feature a tie wire support system
with turnbuckles for precise tensioning of the wires. All hardware
for attachment to a wood, truss or concrete supporting structure
shall be included. The finish shall be scratch resistant white fused
epoxy. Assembly and installation shall be done according to the
instructions provided by the manufacturer.
COMPONENTS:
Includes
two-piece suspended ceiling plate and all hardware for attachment
to a wood, truss or concrete supporting structure or true ceiling. |
|
