Peerless
|
Peerless Industries,
Inc. is
your source for LCD Projector Mounts, Plasma and LCD Screen Mounts,
Television Mounts, AV Stands, Carts and Pedestals, Camera and Speaker
Mounts
PEERLESS
TV, AV AND FLAT PANEL CEILING MOUNTS
|
|
| I-Beam
Clamp with Decoupler |
 |
The
Peerless I-Beam Clamp allows a Multi-Display assembly to be attached
to a large overhead I-beam. Three models are available to cover
a wide range of I-beam sizes.
UL Listed
|
| Features: |
|
Adjustable clamping I-beam interface |
Heavy gage steel construction |
|
Decoupler (absorbs structural vibrations) |
Black fused epoxy finish |
| I-Beam Clamp TECHNICAL
DATA |
 |
| MODEL# |
|
I-BEAM
DIMENSIONS |
|
WEIGHT |
SHIP.
WEIGHT |
MAX.
LOAD |
| WIDTH
(W) |
HEIGHT
(H) |
| min. |
max. |
min. |
max. |
| DCT
500 |
|
7
(178) |
12
(204) |
.25
(6) |
1
(25) |
|
9.2
(4.2) |
9.4
(4.3) |
600
(272) |
| DCT
600 |
|
15
(381) |
19.5
(495) |
1.5
(38) |
2
(51) |
|
12.6
(5.7) |
13.1
(6) |
600
(272) |
| DCT
700 |
|
15
(381) |
19.5
(495) |
2.5
(64) |
3
(76) |
|
13.1
(6) |
13.6
(6.2) |
600
(272) |
NOTES:
ALL DIMENSIONS: IN. (MM), ALL WEIGHTS: LB. (KG.)
MATERIAL: COLD ROLLED STEEL AND STEEL TUBING FINISH: BLACK
FUSED EPOXY
ARCHITECT OR INSTALLER MUST VERIFY THAT THE I-BEAM WILL SAFELY SUPPORT
THE COMBINED LOAD OF ALL ATTACHED HARDWARE AND COMPONENTS.
MAXIMUM LOAD = THE COMBINED WEIGHT OF ALL ATTACHED
HARDWARE AND COMPONENTS. THE ASSEMBLY MUST BE IN BALANCE MEANING
ALL TVs (ON THE CAROUSEL) MUST BE THE SAME MODEL AND EACH TV SUPPORT
TRAY MUST CONTAIN A TV. IF APPLICABLE, ALL VCRs (ON THE CAROUSEL)
MUST BE THE SAME MODEL AND EACH VCR MOUNT MUST CONTAIN A VCR. |
| |
ARCHITECT
SPECIFICATIONS
The ceiling
fixture shall be a Peerless model DCT____ I-Beam Clamp and shall
be mounted where indicated on the plans. It shall consist of a clamping
I-beam interface with a decoupler to absorb structural vibrations.
It shall be constructed of heavy gage cold rolled steel and finished
in scratch resistant black fused epoxy. It shall be UL Listed. Assembly
and installation shall be done according to the instructions
provided by the manufacturer. |
COMPONENTS
included
with a Multi-DisplayTM I-Beam Clamp |
 |
|
