Our Scissor Lift stabilizes projector both laterally and front–to–back with 3 sets of scissors.

Click on the picture for a larger view.
  Draper’s Scissor Lift and Scissor Lift SLX not only conceal your projector above the ceiling and set it exactly where you need it at presentation time, they also bring it down to within easy reach for service.
  Draper  positions the lift to your specifications.
  Choose from seven models with service positions ranging from 4 to 15 feet.
  Scissors on the left, right and back sides of the unit stabilize the projector from any sway both laterally and front–to–back resulting in quiet, fluid movement of the Scissor Lift. No other manufacturer offers you 3 sets of scissors and this much stability.
  Features a small footprint: 23" wide x 23½" deep, or 27" x 29½" for the SLX Series. 
  Projectors can be bolted directly to the lift’s bottom pan, or mounted with the projector’s standard ceiling mounting bracket. 
   Each lift is equipped with a fail safe inertial safety belt system with air craft cables and a Cable Management System that includes a pre–wired power cable on the back scissor, bringing 110v current right to your projector.

   Click on the picture for a larger view.

Optional Decorative Cover—
Covers scissor arms and 
protects from dust.

  Optional universal steel ceiling closure with a recess to accept ceiling tile, or with a smooth surface finished in white baked enamel. 
  Optional factory installed hookup for RGB, Video and Sync.
  An optional plenum enclosure is also available.
  Optional ceiling access door provides access when unit it installed above hard ceiling and access to the projector from above is not convenient. Available with a metal finish to be painted by ceiling contractor, or to accept ceiling material to match the surrounding ceiling.
  Can be independently operated using  Draper’s motorized lift controls.
  Can be used with our Aero Low Profile Lift Bracket.
  U. S. Patent # D395,909
  Warranted for one year against defects in materials and workmanship.

A projector lift designed for today’s smaller projectors

Click on the picture for a larger view.
  The Micro Projector Lift (MPL) is small and convenient, just like the projectors it is designed to accommodate.
  Weighs only 35#  (13 kg.)
  The closed height of the lifting unit is only 5" (13 cm) tall (not including projector mounting mechanism or closure), so just a minimal amount of overhead ceiling space is required.
  Maximum extension is 4' (1.2 meters).
  All components can be serviced from below the unit, so the ceiling need never be opened.
  Projector’s "show" position can be set at any point—with infinite adjustability—up to extension.
  Patented 3-scissor design. 
  Compact side folding scissor.
  Scissors made of injection molded nylon with long glass fiber reinforcement.
  Available with 110 or 220 volt motor. (Transformer not required.)
  Optional ceiling access door provides access when unit it installed above hard ceiling and access to the projector from above is not convenient. Available with a metal finish to be painted by ceiling contractor, or to accept ceiling material to match the surrounding ceiling.
  Can be independently operated using  Draper’s motorized lift controls.
  Can be used with our Aero Low Profile Lift Bracket.
  U. S. Patent # D395,909, other patents pending.
  Warranted for one year against defects in materials and workmanship.

Now our Revelation mount is available in two sizes
Click on the picture for a larger view.
  You won’t see or hear the projector—not before, during, or after the presentation. You’ll only see a hinged door in the ceiling.
  The new optional Revelation Shield eliminates 82% of projector noise - putting it at whisper level. (This may vary somewhat with the projector you use.)  It also shields the projector from smoke, grease and other adverse environmental conditions that could damage the projector.
 How the Revelation Mount Works
Click on the picture for a larger view.
  Single lens projector sits in a pan above the ceiling and projects  its image onto a highly reflective first surface glass mirror, then to a second mirror on the door. When the door is lowered into the room 17" and at a 45° angle, the image is projected precisely onto the screen.
  Optional plenum housing includes an intake and exhaust fan system with 4" couplers for connection to remote ventilation duct work. 
  Optional access doors are available for plaster ceilings.
  Can be independently operated using  Draper’s motorized lift controls.
  See planning sheet for projector compatibility.

Projector Space (HWL)-To fit within parameters of Revelation. 
Includes allowance for plenum enclosure.
  Warranted for one year against defects in materials and workmanship.
  U. S. Patent 6,379,012.

Accommodates single lens projectors.

Click on the picture for a larger view.
  Bomb bay doors and a slim cross-section distinguish the LCD projector lift.
  Housing of aluminum, with doors finished in ceiling white.
  Contains two 110v power outlets. 
  Contains current sensor that requires projector to cool before retracting.
  A flat ceiling closure, similar to that furnished for the Scissor Lift, is optionally available.
  Can be used with our Aero Low Profile Lift Bracket.
  Can be independently operated using Draper's motorized lift controls.
Click on the picture for a larger view.
  Sizes and capacities shown in diagram on left.
  Model A can accommodate projectors up to 11" x 18" x 18", weighing less than 65 lbs.
  Model B can accommodate projectors up to 16" x 23" x 23", weighing less than 65 lbs.
  Optional ceiling access door provides access when unit is installed above hard ceiling and access to the projector from above is not convenient. Available with a metal finish to be painted by ceiling contractor, or to accept ceiling material to match the surrounding ceiling.
  Warranted for one year against defects in materials and workmanship.

A ceiling projector mount that accommodates virtually any ceiling-mounted projector.

Click on the picture for a larger view.
  Motorized ceiling-recessed projector mount.
  Hides and protects your video projector when not in use. 
  After the presentation, touch a switch and the ElectraMount retracts into the ceiling—invisible until the next time it’s needed. 
  And, with a touch of a switch, it descends, smoothly and precisely, to exactly the proper position. 
  The projector is suspended from the ElectraMount’s traveling "ceiling" grid of 2" x 1" x 16 ga. tubular steel, using standard ceiling mounting hardware, so it can be adjusted exactly as for a normal ceiling installation.

Click on the picture for a larger view.
  Traveling grid and the closure operate simultaneously and in parallel, on four 1" dia. threaded steel rods.  
  Steel ceiling closure in off-white baked enamel, or recessed to accept ceiling tile.
  Five models accommodate almost any projector, up to a full 300 pounds.
  If you need greater lifting capacity, see our Scissor Lift.
  Can be independently operated using motorized lift controls.
  Optional ceiling access door provides access when unit is installed above hard ceiling and access to the projector from above is not convenient. Available with a metal finish to be painted by ceiling contractor, or to accept ceiling material to match the surrounding ceiling.
  Warranted for one year against defects in materials and workmanship.
  U. S. Patent # 4,750,832

A projector lift with simplified construction for housing your projector.

Click on the picture for a larger view.
  Unibody construction reduces space needed by over 30%, as compared to the ElectraMount Model S—yet offers more interior capacity.
  Touch the UniMount’s switch and the video projector lowers; touch it again and it retracts, leaving a clear, uncluttered ceiling. 
  The projector is suspended from a traveling grid.
  The ceiling closure (see drawing) lowers in parallel with the projector and grid.
  Ceiling closure may be field painted to match ceiling, or may be finished with ceiling tile or other material.
  Accommodates many popular projectors.
  Compact, requiring only 19½" headroom above the ceiling. 

Click on the picture for a larger view.
  This projector lift is entirely self-contained for simplified installation. 
  Lifting capacity 175 lbs.
  If you need greater lifting capacity, see our Scissor Lift.
  Can be independently operated using  Draper’s motorized projector lift controls.
  Can be used with our Aero Low Profile Lift Bracket.
  Optional ceiling access door provides access when unit is installed above hard ceiling and access to the projector from above is not convenient. Available with a metal finish to be painted by ceiling contractor, or to accept ceiling material to match the surrounding ceiling.
  Warranted for one year against defects in materials and workmanship.
  U. S. Patent # 4,750,832